FAQ

Readers ask: Why doesnt my phone charge?

Why is my phone not charging when its plugged in?

To check that the charger and cable are working, try them with another device. Check that the cable is securely connected to the charger and to your phone. Check that there’s nothing in your phone’s port, like dust or lint. Plug the charger into a wall outlet.

What can you do if your phone doesn’t charge?

If your device charges slowly or won’t charge

  1. Check your charging cable and USB adapter for signs of damage, like breakage or bent prongs.
  2. Use a wall power outlet and check for firm connections between your charging cable, USB wall adapter, and wall outlet or AC power cable, or try a different outlet.

Why is my phone charging slow and dying fast?

The number one reason your iPhone or Android smartphone is charging slow is because of a bad cable. USB cables get dragged around and beat up quite a bit and most people never even think to replace the ones that originally came with their devices. Thankfully, USB charging cables are easy (and cheap) to replace.

How do I know if my charger port is damaged?

How to Determine if your Phone Needs Charge Port Repair

  1. Do you have to hold the phone at a certain angle to charge it? It may be that the charge port on your cellphone is loose and need to be fixed into place again.
  2. You see some off-colored residue or debris around the charge port.
  3. There is nothing wrong with the charger and battery.
You might be interested:  Quick Answer: Why did hitler invade soviet union?

How do I know if my iPhone charger port is bad?

– Turn off the iPhone, unplug the charging port, overlay and plug in the known good charging port, connect to known good charging cable and block. — If the iPhone turns on and starts to charge, the old charging port is bad.

How can I make my charger work again?

While some fixes may require a bit of rewiring, there are many fixes that you can try to get your broken charger working again.

  1. Make sure the outlet is turned on.
  2. Make sure the cables are connected correctly.
  3. Look for lights.
  4. Reboot the charging device.
  5. Try a different outlet.
  6. Check for damage to the charger.

How do you revive a dead phone?

The situation is nerve-wracking and can put even the tech-enthusiasts of people into a tight spot.

  1. However, there is a way to revive a dead Android phone!
  2. Plug in the Charger.
  3. Send a Text to Wake it up.
  4. Pull the Battery.
  5. Use Recovery Mode to Wipe the Phone.
  6. Time to Contact the Manufacturer.

How do I revive a dead non removable battery?

Check the charging port for water damage or corrosion. Check the charging port for bent or broken pins and lint. If the device won’t power on, press and hold the Power button for 5-10 seconds. If the device powers on, but doesn’t hold a charge, power cycle the device then charge fully and re-test.

Can I use alcohol to clean my phone charger port?

You should use 95% and above alcohol as the cleaning agent. The charge port is tricky to try to clean with a q-tip. So don’t use a q-tip to clean that port. Pressurized air is the best way to clean this port.

You might be interested:  Often asked: Why did pamela sue martin leave dynasty?

What to do if water gets in charging port?

If your iPhone or Lightning accessory is wet



Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow. After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.

Leave a Reply

Your email address will not be published. Required fields are marked *