What does GFI outlet stand for?
Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable. Some GFCI and AFCI receptacles can also protect outlets wired downstream on the circuit.
What is a GFCI outlet and where is one needed?
Where GFCIs Are Required. GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
What is the benefit of GFCI outlet?
GFCI outlets cut off electrical power to their receptacle completely as soon as they detect discrepancy in the current. This keeps us from receiving painful shocks from power surges, faulty technology, or contact with water.
Where are GFCI outlets required?
The NEC mandates GFCI protection in many areas of the home: bathrooms, garages, outdoor receptacles, crawl spaces, basements, kitchens and anything within six feet of a sink or water source. While that may seem like a lot, the entirety of a home is not covered.
What causes GFI to trip?
Most often, when a GFCI “trips” it is the result of a faulty appliance plugged into the outlet or an outlet down circuit. Simply push the TEST button to turn power off to the circuit which should cause the RESET button to pop up. You will need to hit RESET to turn the GFCI back on.
Which is better GFCI outlet or breaker?
If you will have receptacles that need GFCI protection in these locations, use a GFCI breaker. GFCI receptacles are easier to install. If money is an issue and you only need to protect a single location, a GFCI outlet might a better choice than a GFCI breaker.
How many outlets can 1 GFCI protect?
There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.
Do all outlets in a kitchen need to be GFCI?
Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. Laundry, utility, and wet bar sinks: Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection.
Should I get a 15 or 20 amp GFCI outlet?
1) You can have a GFI receptacle on either a 15 or 20A circuit. Keep in mind, areas like kitchens, bathrooms, laundry, etc, typically require 20A circuits for receptacles. For areas like outside and garages 20A circuits are always a good idea.
How much does it cost to install a GFCI outlet?
Install a GFCI Outlet national average cost
The national average materials cost to install a gfci outlet is $19.71 per receptacle, with a range between $17.68 to $21.74. The total price for labor and materials per receptacle is $154.04, coming in between $140.26 to $167.83.
How do you fix a GFCI that won’t reset?
The GFI Outlet Won’t Reset
- Press the center “Test” button, then push in the “Reset” button, if applicable.
- Dry the GFI outlet with a standard hair dryer if the outlet has tripped due to exposure to water or moisture.
- Check the main breaker or fuse for the circuit that the GFI outlet is connected to.
When would you use a GFCI outlet?
The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops. In laundry rooms and utility rooms, GFCIs should be installed on outlets within six feet of sinks, washing machines, and water heaters.
Should a refrigerator be on a GFCI?
In the US, under the NEC (National Electrical Code) guidelines, all commercial buildings/kitchens are required to have GFCI for refrigerators. Refrigerators in a garage or unfinished basement must also have a GFCI circuit. Refrigerators that are in a household kitchen do not have to have a GFCI.
Can you have 2 GFCI outlets on the same circuit?
To save money, you can put in a single GFCI and then wire additional standard outlets to the “LOAD” output from the single GFCI. This provides the same protection as having a GFCI at each location.
Do all outlets in bathroom need to be GFCI?
The National Electric Code states that, at a minimum, a bathroom needs one GFCI-protected outlet. It’s recommended that each bathroom has two or three GFCI protected outlets. The number of outlets you choose to protect is up to you, as long as you have at least one GFCI protected outlet in a bathroom.